|
|
| Products
>> JVC
>> Monitors>>
DT-V20L3G |
|
|
JVC
DT-V20L3G
20-inch Broadcast HD Studio Monitor
(16:9 Rack-Mountable)
|
Products
Features:
- 20-inch Multi Format Studio Monitor
- A Multi-format LCD monitor with 3G/dual link HDSDI
inputs,
- 10-bit digital processing significantly improves
image quality while reducing latency to less than one frame.
- Vectorscope and waveform monitor are built-in
- Anti-diffusion 1680 x 1050 LCD panel provides
outstanding resolution,
- high contrast ratio with deep blacks and rich
color. (16x9 picture area is 1680 x 945)
- Status and metering displayed above or below the
active picture area.
- Large Vectorscope/Waveform monitor with over level
function
- New low-latency circuits (<1 frame)
- 3G / Dual-Link inputs for monitoring of up 1080 60p
4:2:2 and 1080 24p 4:4:4 digital video signals: SMPTE 424M/425M/372M
- Accepts 1080/24psf signals
- Embedded Audio with up to 12 channel Audio Level
Display
- Digital Closed Captioning Decoder (EIA-708/608)
built in
- DVI-D (HDMI compatible) for HD-DVD / Blu-Ray Disc
playback
- 1:1 Scaling Mode for pixel-to-pixel 720p display
- Full screen mode for SD 4:3 signals
- ASCII code input of monitor name
- Supports wide range of HD and computer scan rates
- Gold-plated HD SDI connectors
- IP conversion mode can be selected from NORMAL MODE
(frame complement and vertical filter), FIELD (field complement) and
CINEMA (for 24p)
- 4-way remote control system: Contact, pulse
trigger, RS-485 (via RJ-45) x 2 and RS-232
- Metal rear cabinet provides excellent radiation
performance and rugged durability
- Compact square, all-in-one design. Dual-role stand
included
- Front rotary digital controls with analog look
& feel
- Time code on/off function
- VESA 100 mounting holes. Built-in protection of
rear connections
- Input/Output Terminals
- VideoVideo 1
- Input/output of composite signal:
- 2 line, BNC connector x 4, 1 V(p-p), 75
- * The input (IN) and output (OUT) terminals are
bridgeconnected (auto termination).
- Video 2
- Input/output of composite signal:
- 2 line, BNC connector x 4, 1 V(p-p), 75
- * The input (IN) and output (OUT) terminals are
bridgeconnected (auto termination).
- DVI-D
- DVI-D signal input (compatible with HDCP): DVI-D
connector x 1 (compatible with DDC2B)
- COMPO / (G/Y, B/Pb/B-Y, R/Pr/R-Y)
- Input/output of analogue component signal/analogue
RGB signal:
- 1 line, BNC connector x 6
- G/Y: 1 V(p-p), 75 ohms (including sync signal)
- B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 ohms
- * The input (IN) and output (OUT) terminals are
bridgeconnected (auto termination
- EXT. SYNC (CS)
- Input/output of composite sync signal: 1 line, BNC
connector x 2,
- 0.3 V(p-p) - 4 V(p-p), 75 ohms (tri-level sync,
negative polarity sync (bi-level), and BB) (including no video signal)
- * The input (IN) and output (OUT) terminals are
bridgeconnected (auto termination)
- HD/SD SDI (IN 1)
- Digital signal input (compatible with EMBEDDED
AUDIO/DUAL LINK signals): auto detection, 2 line, BNC connector x 2
- HD/SD SDI (IN 2)
- Digital signal input (compatible with EMBEDDED
AUDIO/DUAL LINK signals): auto detection, 2 line, BNC connector x 2
- HD/SD SDI (OUT)
- Digital signal output (compatible with EMBEDDED
AUDIO signals):
- 1 line switched out, BNC connector x 1
- AudioAUDIO ASSIGN
- Analogue audio signal input:
- 2 line, RCA connector x 4, 500 mV (rms), high
impedance
- AUDIO ASSIGN (IN 2)
- Analogue audio signal input:
- 2 line, RCA connector x 4, 500 mV (rms), high
impedance
- AUDIO ASSIGN (MONITOR OUT)
- Analogue audio signal output: 1 line, RCA connector
x 2, 500 mV (rms)
- Audio output
- Internal: 1.0 W + 1.0 W (L/R)
- External ControlMAKE/TRIGGER
- RJ-45 x 1 (8-pin)
- RS-485
- RJ-45 x 2 (IN/OUT) (8-pin)
- RS-232C
- D-sub(9-pin) x1
|
Standard Supplied Accessories: (What's in the Box)
|
Optional
Accessories:
|
|
|
|
