SONY LMD-B170 17-inch cost-effective, lightweight basic grade Full HD LCD monitor for versatile use

 SONY LMD-B170 17-inch cost-effective, lightweight basic grade Full HD LCD monitor for versatile use Maximize
Full HD, Versatile use, Basic Grade

More details


Notify me when available
SONY LMD-B170 17-inch cost-effective, lightweight basic grade Full HD LCD monitor for versatile use

SONY LMDB170 Quick View
Panel: a-Si TFT Active Matrix LCD
Picture Size (Diagonal): 438.2 mm (17 3/8 inches)
Effective Picture Size (H x V): 381.9 x 214.8 mm, 15 1/8 x 8 1/2 inches
Resolution (H x V): 1920 x 1080 pixels (Full HD)
Aspect: 16:9
Unique SDI and HDMI sync-free side by side configurations*
Selected essential functions for basic video operations

Unique SDI and HDMI sync-free side by side configurations*
The LMD-B170 offers unique SDI and HDMI sync-free side by side configurations**,
whereby HD, SD, different frame rates, interlace, PsF and progressive pictures can by displayed on the same monitor.
* Supported with V1.1

SONY LMD-B170 Features:

Video input versatility
The LMD-B170 monitor is equipped with built-in standard input interfaces: HD/SD-SDI (x2), HDMI (HDCP) input (x1) and composite (x1).

Computer input versatility
Multiple computer signals can be received via an HDMI/DVI interface; the resolution range is from 640 x 480 to 1680 x 1050 pixels.

Optimised low-latency I/P conversion
The I/P conversion system delivers automatically optimised signal processing according to input signals with low-latency (less than 0.5 field).
This system helps users to edit and monitor for a live production.

Waveform monitor, vector scope and audio level meter display
An input signal’s waveform and vector scope with an SDI-embedded 2-channel audio level meter can be displayed on screen.
The waveform of a specified line can also be displayed.
In conjunction with the Picture & Picture function, the waveform monitor and vector scope display can monitor two camera signals.
In addition, an audio level meter can display the embedded audio signal from the SDI or HDMI input.
It can display on screen the ch1 to ch8 or ch9 to ch16.

Front stereo speakers
2W+2W front stereo speakers are more powerful than a monaural speaker or a rear speaker system
and you can get a good stereophonic effect from them.
You can select audio sources from either embedded audio or analog audio.

Audio muting *
Audio muting is also available for a quick start of a shooting.**
* Supported with V1.1

Camera focus function
The LMD-B170 monitor can control the aperture level of a video signal, and display images on the screen with sharpened edges to help camera focus operation.
Further to this, the sharpened edges can be displayed in user-selectable colours (white, red, green, blue, and yellow) for more precise focusing.

Time code function
LTC and VITC time code can be displayed at the top or bottom of the picture.

Side by side function
The side by side function of the LMD-B170 allows simultaneous display of two input signals on the monitor’s screen.
This function helps with colour adjustment and setting of camera frames.
This function works when synchronous SDI signals are input.

Flip functions
The Flip function turns the reversed image to a normal view, horizontally or vertically.

On-screen tally
The monitor is also equipped with a three-colours red, green and yellow on-screen tally function.
The position of the tally display can be changed to either the upper or lower section of the screen.

SONY LMD B170 Input Connestions:
Composite Input: BNC (x1), 1 Vp-p ±3dB, sync negative
SDI Input: BNC (x2)
HDMI InputHDMI (x1) (HDCP correspondence)
Audio Input: Stereo mini jack (x1), -5 dBu 47 kO or higher
Parallel Remote: RJ-45 Modular connector 8-pin (x1) (Pin-assignable)
DC Input: XLR-type 4-pin (male) (x1), DC 12 V to 17 V (output impedance 0.05 O or less)

SONY LMDB170 Output Connections:
Composite Output: BNC (x1), Loop-through, with 75 O automatic terminal function
SDI Output: BNC (x1)*, output signal amplitude: 800 mVp-p ±10%, output impedance: 75 O unbalanced *Output from SDI 1 only.
Audio Monitor Output: Stereo mini jack (x1)
Speaker (Built-in): 2.0 W+2.0W (Stereo)
Headphone Output: Stereo mini jack (x1)

What is in the BOX SONY LMD-B170:
AC power cord (1)
AC plug holder (1)
Before Using This Unit (1)
CD-ROM (1)

Related Products